Roland FR-4X - Page 52

52
Menu Options
Parameter Explanation/Value
BtnNsTyp
(Button Noise Type)
F-Folk2
Classic2
Studio
Tradition
Steierische
Trikitixa
F-Jazz
Classic3
Bajan
BtnNs Lv
(Button Noise Level)
Specifies the volume of the button noise.
Off, –40–Std–40
RdGrwTyp
(Reed Growl Type)
This parameter allows you to simulate
the typical noise a bass reed makes just
before it stops vibrating altogether.
Each instrument of the accordion family
produces its own typical growl.
MEMO
If you’ve added expansion sounds, you can
select types other than those listed here.
Bandoneon
I-Folk
I-Folk2
Classic
Cajun
Jazz
F-Folk
D-Folk
Organetto
F-Folk2
Classic2
Parameter Explanation/Value
RdGrwTyp
(Reed Growl Type)
Studio
Tradition
Steierische
Trikitixa
F-Jazz
Classic3
Bajan
RdGrw Lv
(Reed Growl Level)
Specifies the volume of the Reed Growl
sound.
Off, –40–Std–40
Rev Send
(Reverb Send)
Cho Send
(Chorus Send)
Use these parameters to set the Reverb
or Chorus send levels (how much effect
should be applied to the Free Bass
section).
The higher the value you set, the more
the Free Bass section (which includes the
chord buttons) will be processed by the
effect in question.
0–127
0–127
Bel Dtne
(Bellows Detune)
Here, you can specify how strongly the
pitch of the simulated Free Bass reed(s)
changes when you open or close the
bellows faster than usual.
If the “Standard” setting seems too mild,
try “High.” If it is too strong, use “Low.”
If you do not want any detuning effect,
select “Off.”
The most convincing setting usually
depends on the selected instrument(s).
Off
Low
Standard
High
MIDI TX
(MIDI Tx)
Pressing the [ENTER/YES] button lets you
make MIDI TX settings for the free bass
part.