Roland FR-4X - Page 55

55
Menu Options
Parameter Explanation/Value
Bel Dtne
(Bellows Detune)
Low
Standard
High
ExpPedal
(Expression Pedal)
Select “Off ” If you want to use the
bellows for expressive purposes.
Select “On” if you want to control
the expression by foot purchasing
an optional MIDI foot controller
(e.g. FC-300).
Off, On
Touch
(Touch)
This parameter allows you to specify the
velocity sensitivity of the Right Hand
section keys when they are used to play
Orchestral sounds.
NOTE
5 Only when you select a tone that can be
controlled only by the keyboard, you can
set the “Touch” (When a tone that can
not be set is selected it will be displayed
as “----”).
For details regarding these sounds
refer to the”Tone & Drum Kit List”
supplementary manual.
&
http://www.roland.com/manuals/
5 There are several sounds which
the difference in the velocities is
incomprehensible.
“FIX.L (Fixed Low)”: The
velocity value will always
be 50 (0x32) regardless of
the strength with which
you play the keyboard.
“FIX.M (Fixed Med)”: The
velocity value will always
be 80 (0x50) regardless of
the strength with which
you play the keyboard.
“FIX.H (Fixed High)”: The
velocity value will always
be 127 (0x7F) regardless
of the strength with which
you play the keyboard.
“LOW (Low)”: The velocity
value will not be less than
33 (0x21) even when
you play the most weak
keyboard. You get a certain
amount of volume even
if you play lightly on the
keyboard.
“MED (Medium)”: The
velocity value will not be
less than 17 (0x11) even
when you play the most
weak keyboard. This is the
middle of the “Low”and
the “High.”
Parameter Explanation/Value
Touch
(Touch)
“HIGH (High)”: The
velocity value is controlled
in the range of 1 (0x01) ~
127 (0x7F) by the strength
with which you play the
keyboard.This setting is
the most wide range of
velocity control.
“F.L+B (Fixed
Low+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 20 (0x14).
“F.M+B (Fixed
Med.+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 50 (0x32).
“F.H+B (Fixed
High+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 80 (0x50).
“BELW (Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard.
Poly
(Polyphonic)
“On”: You can play chords using the
selected part.
“Off (Mono)”: You can play only one note
at a time.
You might select this mode to play a
trumpet or woodwind sound in a natural
style.
On, Off (Mono)
PortTime
(Portamento Time)
Instead of changing in semitone steps,
the pitch glides from one note to the
next whenever “PORT.TIME” is higher
than “0.”
The higher the value, the slower the
glide. This effect is particularly useful for
synthesizer sounds.
0–127
MIDI TX
(MIDI Tx)
Pressing the [ENTER/YES] button lets you
make MIDI TX settings for the orchestra
part.