Roland FR-4X - Page 73

73
Menu Options
Parameter Explanation/Value
Bel Curv
(Bellow Curve Type)
“DYN1 (Dynamic1)”:
This setting makes it easier
to control the sound by
strongly pushing or pulling
the bellows, and heightens
the response of the attack
when the bellows is being
pushed or pulled gently.
This setting is easy to
play when the bellows
resistance regulator is set
to a medium setting.
“DYN2 (Dynamic2)”:
This setting makes it easier
to control the sound by
strongly pushing or pulling
the bellows. This setting
is easy to play when
the bellows resistance
regulator is set to a
medium setting.
Min Bel
(Minimum Bellows)
This “MIN BEL” parameter allows you
to choose a minimum threshold for the
bellows curve types.
“Off”: No Effect
“1–50”: Amount of sensitivity
This parameter has no effect with the
“Fixed Low,” “Fixed Med,” or “Fixed
High” bellows curves.
Off, 1–50
B&C Mode
(Bass & Chord Mode Layout)
This parameter allows you to choose the
note system used in Free Bass mode.
&
“BASS & CHORD TABLE” (p. 100)
NOTE
5 This shift does not apply to Free Bass
mode, which is an altogether different
mode.
5 The FR-4x is supplied with several
reference caps designed to help you
locate the bass buttons without looking
at them.
&
“How to Remove and Insert Reference
Caps” (p. 14)
MEMO
5 This parameter is remembered even
when the power is turned off.
5 This parameter is not initialized by a
factory reset.
“2 Bs Rows”:
Two rows of bass buttons,
and four rows of chord
buttons.
If you choose “3 Bs Rows,” the bass
rows increase by 20 buttons (one row),
and diminished chord rows will not be
available.
“3 Bs Rows A-7th”:
The sixth chord row will be
seventh chords (7) without
the 5th.
For example in the case
of a C7 chord, the notes
C-E-Bb (no G) will sound.
Parameter Explanation/Value
B&C Mode
(Bass & Chord Mode Layout)
“3 Bs Rows A-5 dim”:
The sixth chord row will
be seventh chords without
the root note.
For example in the case
of a C7 chord, the notes
E-G-Bb (no C) will sound.
“3 Bs Rows B-7th”:
The “3 Bs Rows A-7th”
and bass row layout are
different.
“3 Bs Rows B-5 dim”:
The “3 Bs Rows A-5 dim”
and bass row layout are
different.
“3 Bs Rows Bx-7th”:
The “3 Bs Rows B-7th”
layout is reversed left to
right. The position of the
C3 note changes (9th from
left to 12th from left).
“3 Bs Rows Belgium”:
Simulates the Belgian
layout.
FBs Mode
(Free Bass Mode Layout)
This parameter allows you to choose the
note system used in Free Bass mode.
Your FR-4x contains the 5 most popular
ones.
&
“FREE BASS MODE TABLE” (p. 101)
NOTE
5 This layout does not apply to bass &
chord mode.
5 The FR-4x is supplied with several
reference caps designed to help you
locate the bass buttons without looking
at them.
&
“How to Remove and Insert Reference
Caps” (p. 14)
MEMO
5 This parameter is stored even when the
power is turned off.
5 This parameter is not initialized even if
the factory reset all.
Minor 3rd
Bajan
Fifth
North Europe
Finnish