Roland FR-4X - Page 77

77
Menu Options
Parameter Explanation/Value
Switch 1–6
(Switch 1–6)
“Sustain A,” “Sustain B”:
Transmits a hold message
for the sound of the
selected part via MIDI. The
notes being played on
the right hand keyboard
or left hand keyboard will
continue sustaining as
long as you hold down the
function switch.
&
“Sustain A Routing”
(p. 79)
&
“Sustain B Routing”
(p. 79)
“Start/Stop”:
Pressing the Function
Switch once will cause
the external MIDI device
to start playback. Press
the Chin again to stop
playback.
“Intro 1,” “Intro 2,”
“Intro 3,” “Intro 4”:
The Function Switch can
be used to select the
“Intro” patterns of an
external MIDI arranger
device.
NOTE
Arranger instruments
of other manufacturers
may not understand this
message.
“Main 1,” “Main 2,”
“Main 3,” “Main 4”:
The Function Switch can
be used to select the
“Main” patterns of an
external MIDI arranger
device.
NOTE
Arranger instruments
of other manufacturers
may not understand this
message.
“Fill Down 1,”
“Fill Down 2,”
“Fill Down 3,”
“Fill Up 1,”
“Fill Up 2,”
“Fill Up 3”:
The Function Switch can
be used to select the “Fill”
patterns of an external
MIDI arranger device
NOTE
Arranger instruments
of other manufacturers
may not understand this
message.
Parameter Explanation/Value
Switch 1–6
(Switch 1–6)
“Ending 1,”
“Ending 2,”
“Ending 3,”
“Ending 4”:
The Function Switch can
be used to select the
“Ending” patterns of an
external MIDI arranger
device.
NOTE
Arranger instruments
of other manufacturers
may not understand this
message.
“Intro”:
The Function Switch can
be used to select the
“Intro” pattern of an
external MIDI arranger
device.
“Fill to Original,”
“Fill to Variation”:
The Function Switch can
be used to select a fill-in
pattern of an external
MIDI arranger device.
If the instrument being
controlled provides several
fill-in patterns, you can
select them one after the
other in ascending order.
“Ending”:
The Function Switch can
be used to select the
“Ending” pattern of an
external MIDI arranger
device.
“Pitch Up 0.5 (1/2),”
“Pitch Up 1”:
The selected Function
Switch allows you to bend
the notes you are playing
a semitone (“1/2”) or two
semi-tones (“1”) up.
When you release the
Function Switch, the pitch
returns to its regular level.
“Pitch Down 0.5 (1/2),”
“Pitch Down 1”:
The selected Function
Switch allows you to bend
the notes you are playing
a semitone (“1/2”) or two
semi-tones (“1”) down.
When you release the
Function Switch, the pitch
returns to its regular level.