31
Performance
Adjusting the Volume Level for Individual Layers
With the RD-700NX, each of the parts that is performed using the internal sound generator is referred to as a Layer.
For each layer (UPPER 1, UPPER 2, LOWER 1, LOWER 2), you can use the Layer switch and Layer LEVEL slider to turn the sound on/o and adjust its
volume.
Layer
Switch
Layer
LEVEL
Sliders
Layer Switch
These buttons turn each layer on/o .
Layers for which the Layer switch indicator is lit (on) will produce sound when you play the keyboard.
Layers for which the Layer switch indicator is unlit (o ) will not produce sound even if you play the keyboard.
Each Layer switch will alternately turn on/o each time it is pressed.
Layer LEVEL Slider
Adjusts the volume of an individual layer.
When a layer’s Layer switch indicator is not lighted, no sound is produced for the layer even when the slider is moved.
MEMO
Use the [VOLUME] slider when adjusting the overall volume level (p. 18).
NOTE
If the CONTROL indicator is lit, you can’t use the Layer LEVEL sliders to adjust the volume (p. 73).
To Next Page
Loading...
