Roland RD-700NX

79
Detailed Settings for Each Function
4. Press the [LAYER EDIT] (MEDIA) button to select the memory
containing the Live Set le you want to delete.
5. Use the Cursor [
] [ ] buttons or the VALUE dial to select
the Live Set le that you want to delete, and press the
[ENTER] button.
The conrmation message appears.
If you do not want to delete the Live Set le, press the [EXIT/SHIFT]
button.
MEMO
If you choose “ALL,” all Live Set les will be deleted.
6. Press the [ENTER] button to delete the Live Set le.
NOTE
Be sure never to turn o the power while the delete is in progress.
7. Press the [MENU] button, extinguishing its indicator.
You’ll be returned to the Live Set screen or the One Touch screen.
Copying a Live Set File (LIVE SET Copy)
You can copy a Live Set le from the RD-700NX’s internal memory to
USB memory (sold separately).
You can also copy a Live Set le from USB memory to the RD-700NX’s
internal memory.
1. Press the [MENU] button, getting the indicator to light.
The Menu screen appears.
2. Press the Cursor [ ] [ ] buttons to select “5.File,” then
press the [ENTER] button.
The Edit screen appears.
3. Press the Cursor [ ] [ ] buttons to select “3. Live Set
Copy,” then press the [ENTER] button.
The following screen appears.
4. Press the [LAYER EDIT] (DEST) button to select the type of
copy.
Parameter Description
INT
USB
Copy from the RD-700NX’s internal memory to
USB memory.
USB
INT
Copy from USB memory to the RD-700NX’s
internal memory.
5. Use the Cursor [ ] [ ] buttons or the VALUE dial to select
the Live Set le that you want to copy.
If you do not want to copy the le, press the [EXIT/SHIFT] button.
MEMO
If you choose “ALL,” all Live Set les will be copied.
6. Press the [ENTER] button to copy the Live Set le.
NOTE
Be sure never to turn o the power while the copy is in progress.
MEMO
If a le with the same name has already been saved, the
conrmation message “Overwrite OK?” appears. To overwrite the
Live Set le, press the [ENTER] button; to save the le under a
dierent name, press the [EXIT/SHIFT] button.
7. Press the [MENU] button, extinguishing its indicator.
You’ll be returned to the Live Set screen or the One Touch screen.