EasyManuals Logo

Roland RD-700NX User Manual

Roland RD-700NX
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
57
Making Detailed Settings for Tones
Parameter Value Description
VRL (Velocity
Range Lower)
1–127
This species the lower limit (VRL) and upper limit (VRU) of the range in which the tone is played according to the velocity.
Make this setting when you want the tone to change depending on the key velocity.
This setting is disregarded with certain tones.
VRU (Velocity
Range Upper)
1–127
Sns (Velocity
Sense)
-63–+63
This setting determines how the volume changes in response to the velocity.
The volume is increased as the keyboard is played with greater force when a positive value is used; when a negative value is
selected, the volume decreases as the keys are played with greater force.
This setting is disregarded with certain tones.
Max (Velocity
Max)
1–127
Maximum velocity value for the corresponding key.
Lowering this value will produce softer notes even if you play the keyboard strongly.
This setting is disregarded with certain tones.
V.Reserve (Voice
Reserve)
0–64 Species the number of voices that will be reserved for each layer if you attempt to play more than 128 voices.
Dp
ON, OFF
Species whether the damper pedal will (ON) or will not (OFF) control each layer.
F1 Species whether the pedal connected to the FC1 jack will (ON) or will not (OFF) control each layer.
F2 Species whether the pedal connected to the FC2 jack will (ON) or will not (OFF) control each layer.
PB Species whether the pitch bend lever will (ON) or will not (OFF) control each layer.
Md Species whether the modulation lever will (ON) or will not (OFF) control each layer.
S1 Species whether the [S1] button will (ON) or will not (OFF) control each layer.
S2 Species whether the [S2] button will (ON) or will not (OFF) control each layer.
LW2 Species whether the control slider (LW2) will (ON) or will not (OFF) control each layer.
LW1 Species whether the control slider (LW1) will (ON) or will not (OFF) control each layer.
UP2 Species whether the control slider (UP2) will (ON) or will not (OFF) control each layer.
UP1 Species whether the control slider (UP1) will (ON) or will not (OFF) control each layer.

Table of Contents

Other manuals for Roland RD-700NX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland RD-700NX and is the answer not in the manual?

Roland RD-700NX Specifications

Power IconPower
power consumption12 W
Audio and Sound IconAudio and Sound
maximum polyphony128 voices
sound generatorSuperNATURAL Piano, SuperNATURAL (E.Piano), Virtual Tone Wheel Organ, PCM Sound Generator, GM2 (for SMF Playback)
effectsMulti-Effects (2 x 4 systems, 84 types), Reverb (6 types), Chorus (3 types), 3-band Compressor, 4-band Digital Equalizer
Connectivity IconConnectivity
output jacksL/MONO, R Jacks (1/4-inch phone type), BALANCED OUT (L, R) Jacks (XLR type)
pedal jacksDAMPER Pedal Jack, Control Pedal Jacks (FC1, FC2)
midi connectorsIN, OUT1, OUT2, THRU/OUT3
Weight and Dimensions IconWeight and Dimensions
width1, 444 mm (56-7/8 inches)
depth375 mm (14-13/16 inches)
height148 mm (5-7/8 inches)
weight25.0 kg (55 lbs 2 oz)

Related product manuals