Roland RM-2 - V-Practice Pad (Rp-2)

8
Panel Descriptions
fig.01-02
1. Trigger Input 1
2. Trigger Input 2
Use these inputs to connect pads.
* You can connect various pads other than
RP-2 to the RM-2, and also connect two
pads at the same time using the Trigger
Input 1 and 2. Refer to "Connecting Two
RP-2 Pads" (p. 15) to use two RP-2, and
"Connecting Pads Other Than the RP-2"
(p. 23) to use other pads.
3. HEADPHONES/OUTPUT jack
Connect this to your headphones, amp,
or audio system.
* The RM-2 outputs sounds in monaural.
4. MIX IN jack
Connect this to your CD, MD, or other
similar device, and you can play along
with them.
5. Security Slot ( )
988
http://www.kensington.com/
6. DC IN jack
Connect the AC Adapter (Optional)
here (p. 9).
7. POWER switch
This switch turns the power on/off (p.
10).
V-PRACTICE PAD (RP-2)
fig.01-04
Headphones
CD/MD deck,
cassette player, etc.
3
4
2
1
AC adaptor
5
6
7
Security
Slot
Mount the RM-2 here
Mount the RM-2 here
.
Sensor
Washer
Tuning Bolt
Hoop (Rim)
Hoop (Rim)
Head
Head
Frame
ame
Output J
Output J
ack
Stand Fixing Nut (M8)
Stand Fixing Nut (M8)
Rub
Rub
ber Feet