17
Operation of the RM-2
PAD SENS
1–16
Adjust the Sensitivity of the pad to regulate the pad response. Higher settings result in
higher sensitivity, so that the pad will produce a loud volume even when struck softly.
When you strike the pad, the strength with which the pad is struck (velocity) is
shown in the display on a six-level scale.
Set the velocity at a value of 127 when you strike the pad most forcefully.
fig.
Strength
of Striking
Hard
Soft
Velocity
127
100–126
75–99
25–49
1–24
50–74
To Next Page
Loading...
