14
Connecting to Your Computer/MIDI Keyboard
■
Connecting to a Computer via the Serial Connector
fig.1-4e
1
Turn off the power of the SC-8850, then set the COMPUTER switch, which
is located on the back of the SC-8850.
fig.1-5e
Select the “Mac” position if you are using an Apple Macintosh computer, or select
the “PC” position if you are using a PC.
The PC baud rate is 38.4 Kbps.
Before making connections
to other devices, it is very
important to turn down the
volume and turn off the
power in order to prevent
malfunctions or speaker
damage.
MIDI keyboard (PC-180, PC-160 etc.)
PC
Apple Macintosh Series
Serial connector
Computer cable
(sold separately)
Modem Port or Printer Port
Apple Macintosh
PC
OUT
( | ❍ | ❍ | )
IN 1
Apple Macintosh Series
PC
Mac
PC-1
PC-2
MIDI
Mac
PC-1
PC-2
MIDI
Turn off the power before
changing the setting of the
COMPUTER switch. The
setting of this switch takes
effect when the power is
turned on.
Be aware that the appro-
priate setting of the
COMPUTER switch may
differ, depending on the
type of computer.
To Next Page
Loading...
