Roland Sound Canvas SC-8850 User Manual

23
Restoring the Factory Settings (Initialize)
Probably there is a case that you do not want to store the changes you made in the
SC-8850’s memory. If so, you can easily restore the settings to their factory condition.
Initializing All Settings to the Factory
Condition (Factory Preset)
This operation will initialize all the settings of the SC-8850 to the factory settings.
1
Simultaneously press both the [EDIT] and PART [ ] buttons (UTIL).
2
Press [INIT] ([F3]).
3
Press VAR. [ ] or INST [ ] to move the cursor up and down, and select
Initialize All.
fig.2-1e
4
Press [ENTER].
The display will ask “Initialize Sure?”
5
To initialize, press [ENTER].
To quit without initializing, press [EXIT].
Shortcut Keys
You can easily initialize the settings of theSC-8850 using the [SHIFT] button.
1
While holding down [SHIFT], press PART [].
The display will ask “Initialize Sure?”
2
To initialize, press [ENTER].
To quit without initializing, press [EXIT].
Be aware that this will also
initialize System param-
eters (p.62) and User
parameters related to User
Instrument and User Drum
Set. (p.67, p.73).
SCROLL bar
This indicates the location of the parameter in the whole parameters.
If this black square is at the bottom, or there is no black square,
it means there is no other parameters than displayed.

Roland Sound Canvas SC-8850 Specifications

General

Brand	Roland
Model	Sound Canvas SC-8850
Category	Synthesizer
Language	English