34
Try Out the Various Sounds
How to change the pan of a part using MIDI messages
<Example> Setting the pan of Part 2 to L30
MIDI CH = 02
CC#10 34
Since L63 is far left, 0 is center, and R63 is far right, it is calculated like this: 64 - 30 = 34
How to change the pan of a part to Random using MIDI messages
<Example> Setting the pan of Part 1 to be random
If you set the pan to be random, you cannot use Control Change message like the
above example.
Transmit the following System Exclusive Message
fig.3-8be
If you set the Pan to R30,
it is calculated like this:
64 + 30 = 94
Also refer to MIDI Imple-
mentation (p.238).
F0 41 10 42 12 [ 40 11 1C ] [ 00 ] [ 13 ] F7
address
data
checksum
Part 1
random
checksum
To Next Page
Loading...
