74
Creating a Sound or Drum Set
Storing an Individual Drum Instrument (procedure 1)
Here’s how you can save an edited drum instrument for each note.
1 In the drum screen, create a drum instrument.
fig.6-19
2 Press [Write] ([F2]).
The display will ask “Write User Drum?”
fig.6-20
3 If you want to change User Drum No. or Inst, press VAR. [ ] or INST
[ ] to move the cursor to User Drum No. or Inst.
4 Rotate the [VALUE] knob, or press [DEC] or [INC] to select the number
for User Drum No. or Inst. You can choose 65 or 66 for User Drum No.
5 To save the settings as a User Drum, press [ENTER].
To quit without saving the settings, press [EXIT].
To use the saved user drum, specify the drum set number 65 or 66, then
specify the instrument.
For the procedure of
editing drum sounds, refer
to Drum Edit (p.70).
Make sure to keep the
power on while the settings
are being stored!
To Next Page
Loading...
