Roland TrueVIS VG-640 - Using Hard-To-Dry Media

Conguring Settings to Match the Properties of the Media
4
Advanced Functions
130
Using Hard-to-dry Media
Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C
Press [ ], then [ ] to display the screen shown below.
SUB MENU
SCAN INTERVAL
D
Press [ ] to display the screen shown below.
SCAN INTERVAL
OFF OFF
E
Press [ ] or [ ] to select a value.
Larger values cause the media to move more slowly, enabling you to extend the drying time ac-
cordingly.
SCAN INTERVAL
OFF 1.0sec
F
Press [ENTER] to conrm your entry.
G
Press [MENU] to go back to the original screen.
Description
Use this if ink dries poorly even when the dryer is used. Depending on the software RIP you are using, you can
also make this setting in the software RIP. When you have made the setting in the software RIP, the printer's
setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF