Roland TrueVIS VG-640 - Viewing the Automatic Environment Correction Function Settings

Advanced Cutting Settings
4
Advanced Functions
143
Viewing the Automatic Environment Correction Function Settings
The automatic environment correction function performs automatic adjustments to the optimal condition
of this machine according to the operating environment (humidity and temperature). Performing automatic
adjustment reduces misalignment in the scanning direction (the direction of cutting carriage movement)
during printing and cutting. Normally set this item to "ENABLE."
Procedure
A
Press [MENU].
B
Press [ ] to display the screen shown below.
MENU
CUTTING MENU
C
Press [ ], then [ ] to display the screen shown below.
CUTTING MENU
AUTO ENV.MATCH
D
Press [ ] to display the screen shown below.
Check that the setting is "ENABLE."
AUTO ENV.MATCH
ENABLE ENABLE
If you want to change the setting, press [ ] or [ ] to select "DISABLE."
E
Press [ENTER] to conrm your entry.
F
Press [MENU] to go back to the original screen.
Default Setting
[AUTO ENV. MATCH]: ENABLE