Roland TrueVIS VG2-540 - Step.4:.Installing.the.drain.bottle; Step 4: Installing the Drain Bottle

40
2.Installation
1. Assembly and Ink Filling
Step 4: Installing the Drain Bottle
Procedure
A
Remove the boom plug.
Discharged uid used in the inspecon when the printer was shipped may remain. Exercise cau-
on.
Boom plug
B
Install the drain funnel.
Screw the drain funnel into the hole where the boom plug was aached.
IMPORTANT
Use cauon to turn the bole without applying excessive force.
C
Install the drain bole stand.
Insert the drain bole stand into the groove on the boom surface of the printer unit, and then
push the drain bole stand to the front.