Roland TrueVIS VG2-540 - Step.6:.Adjusting.the.ink.tube.and.affixing.a.label; Step 6: Adjusting the Ink Tube and Affixing a Label

43
2.Installation
1. Assembly and Ink Filling
Step 6: Adjusting the Ink Tube and A󰀩xing a Label
Adjusting the Ink Tube
This work must be performed by a suitably qualied worker. Never aempt to perform this work
yourself.
CAUTION
Leave this work to a suitably qualied worker.
This procedure includes work near sources of electrical danger and complex
assembly work. Incorrect work may result in injury and mechanical malfunc-
on.
A󰀩xing a Label
This work is required when using the machine with four colors (CMYK).
Items Used in this Procedure
Included
item
Cartridge-slot label (for four colors)
Tubes (4)
Tube joint (8)