Roland TrueVIS VG2-540 - Step.9:.Ink.filling; Step 9: Ink Filling

47
2.Installation
1. Assembly and Ink Filling
Step 9: Ink Filling
Items Used in this Procedure
• Ink pouches (each color)
• TR2 cleaning liquid pouch (1)
IMPORTANT
Be sure to use new ink pouches and a new TR2 cleaning liquid pouch.
Never, under any circumstances, use anything other than the specied type of ink or cleaning liquid.
The ink pouches and the TR2 cleaning liquid pouch must be purchased separately. Contact your
authorized Roland DG Corporaon dealer or visit our website (hp://www.rolanddg.com/).
1.
Select the ink type.
A
Press [ ] or [ ] to select the ink type, and then press [ENTER].
SELECT INK TYPE
TR2 LkW
SELECT INK TYPE
TR2 LkOr
SELECT INK TYPE
TR2 4C
Name to select
Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
Light cyan (Lc)
Light magenta (Lm)
Light black (Lk)
White (W) Orange (Or)
TR2 LkW
  
TR2 LkOr
  
TR2 4C

B
Press [ ] or [ ] to select [YES], and then press [ENTER].
TR2 LkW
[YES] NO
TR2 LkOr
[YES] NO
TR2 4C
[YES] NO
If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step
A
.