48
2.Installation
1. Assembly and Ink Filling
C
Make sure the drain bole is installed, and then press [ENTER].
P. 40 "Step 4: Installing the Drain Bottle"
INSTALL
DRAIN BOTTLE
The screen shown below appears, and then the machine starts the preparaons for the ink ll-
ing. The (approximate) remaining me for the procedure is displayed on the screen. (The display
shown below is an example. "20:00" = "20 minutes and 00 seconds")
FILLING INK...
>>>>> 20:00
MEMO
If the screen shown below appears here, pouch trays remain in the ink slots. Remove all the
pouch trays.
REMOVE CARTRIDGE
12345678
2.
Fill the machine with ink and TR2 cleaning liquid.
A
Set the ink pouch for each color and the TR2 cleaning liquid pouch in the pouch trays.
Hook
Check that the hook has caught.
B
Gently shake the ink pouch for each color. Shake the white ink pouch and the orange
ink pouch 50 mes (for around 20 seconds).
The precipitaon of the ingredients in the ink disables prinng in normal color. So that the ink
mixes well, shake the pouch tray horizontally with a stroke length of around 5 cm (2 in.) from
each end of the tray.
To Next Page
Loading...
