Roland TrueVIS VG2-540 - Page 51

49
2.Installation
1. Assembly and Ink Filling
IMPORTANT
• Do not remove the ink pouches. Shake the enre pouch tray. Removing the ink pouches may lead
to the ink leaking.
• Before shaking, wipe o any ink from around the mouth of the ink pouch. If you do not wipe o
the ink, it may splaer when you shake the pouch tray.
C
When the screen shown below appears, set the pouch tray in which you have set an
ink pouch in the ink slot whose number is ashing.
SET CARTRIDGE
12345678
IMPORTANT
• Do not insert empty pouch trays. Doing so may force air into the ink path and cause printer mal-
funcons.
• Check the color names indicated on the ink slots and the ink pouches to set all the pouch trays in
their correct posions. Insert the pouch trays as far as they will go.
YE
4
3
YE
3
4
D
When the screen shown below appears, set the pouch tray in which you have set the
TR2 cleaning liquid pouch in the cleaning liquid slot.
Insert the pouch trays as far as they will go.
* "CL-LIQUID FOR WIPER" indicates the TR2 cleaning liquid.
SET CL-LIQUID
FOR WIPER
The screen shown below appears.
FILLING INK...
>>>>> XX:XX