Roland TrueVIS VG2-540 - Specifications.table

63
3.Appendix
VG2-640 VG2-540
Prinng method Piezo ink-jet method
Media
Width 315 to 1,625 mm (12.4 to 64 in.) 275 to 1,371 mm (10.8 to 54 in.)
Thickness
Max. 1.0 mm (39 mil) with liner, for prinng
Max. 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cung
Roll outer diameter Max. 210 mm (8.3 in.)
Roll weight Max. 40 kg (88 lb.) Max. 30 kg (66 lb.)
Core diameter (*1) 76.2 mm (3 in.) or 50.8 mm (2 in.)
Prinng/cung width (*2) Max. 1,600 mm (63 in.) Max. 1,346 mm (53 in.)
Ink
Type TrueVIS INK 500 ml pouch (only white 250 ml)
Colors
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light black, and
white)
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light black, and
Orange)
Four colors (cyan, magenta, yellow, and black)
Prinng resoluon (dots per inch) Max. 1,200 dpi
Cung speed 10 to 300 mm/s (0.4 to 11.8 in/s)
Blade force (*3) 30 to 500 gf
Blade
Type Roland CAMM-1 series blade
Oset 0.000 to 1.500 mm (0.0 to 59.1 mil)
Soware resoluon (when cung) 0.025 mm/step (0.98 mil/step)
Distance accuracy (when prinng) (*4)
(*5)
Error of less than ±0.3% of distance traveled or ±0.3 mm (±11.8 mil), whichever is
greater
Distance accuracy (when cung) (*4)
Error of less than ±0.4% of distance traveled or ±0.3 mm (±11.8 mil), whichever is
greater
When distance correcon has been performed (when the seng for [CUTTING
MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance trav-
eled or ±0.1 mm (±3.9 mil), whichever is greater
Repeatability (when cung) (*4) (*6) ±0.1 mm (±3.9 mil) or less
Alignment accuracy for prinng and
cung (*4) (*7)
±0.5 mm (±19.7 mil) or less
Alignment accuracy for prinng and
cung when reloading media (*4) (*8)
Error of less than ±0.5% of distance traveled, or ±3 mm (±0.2 in.), whichever is
greater
Media heang system (*9)
Print heater set temperature: 30 to 45°C (86 to 112°F)
Dryer set temperature: 30 to 50°C (86 to 122°F)
Connecvity Ethernet (100BASE-TX/1000BASE-T, automac switching)
Power-saving funcon Automac sleep feature
Power requirements AC 100 to 120 V ±10%, 8.0 A, 50/60 Hz or AC 220 to 240 V ±10%, 4.1 A, 50/60 Hz
Power con-
sumpon
During operaon Approx. 1,090 W
Sleep mode Approx. 40 W
Acousc
noise level
During operaon 63 dB (A) or less
During standby 53 dB (A) or less
Dimensions (with stand)
2,945 (W) × 730 (D) × 1,310 (H) mm (116
[W] × 28.8 [D] × 51.6 [H] in.)
2,685 (W) × 730 (D) × 1,310 (H) mm
(105.8 [W] × 28.8 [D] × 51.6 [H] in.)
Weight (with stand) 204 kg (451.9 lb.) 188 kg (421 lb.)
Specications Table