Roland TrueVIS VG2-540 - Network.settings; 3 Network Settings; Step.1:.Make.the.network.settings.for.the.computer; Step 1: Make the Network Settings for the Computer

55
2.Installation
The examples used in the procedures for making the sengs described in this secon assume you
are using one computer and one machine. The sengs used in this secon are merely example
sengs. The procedures and seng values described here may not be suitable for all operang
environments.
If the computer you're using is connected to a number of networked devices or to the Internet, in-
correct sengs may adversely aect the enre network. For detailed informaon about the sengs,
consult your network administrator.
Step 1: Make the Network Settings for the Computer
Procedure
A
Log on to Windows as an “Administrator” or a member of the "Administrators" group.
B
Display the network connecons screen.
Windows 10:
1
From the [Start] menu, click [Sengs], and then click [Network & Internet].
2
Click [Network and Sharing Center].
3
Click [Ethernet] or [Wi-Fi].
Windows 8.1:
1
From the [Start] menu, click [PC sengs], and then click [Control Panel].
2
Click [Network and Internet], and then click [Network and Sharing Center].
3
Click [Ethernet] or [Wi-Fi].
Windows 7:
1
From the [Start] menu, click [Control Panel].
2
Click [Network and Internet], and then click [Network and Sharing Center].
3
Click [Local Area Connecon] or [Wireless Network Connecon].
3. Network Settings