Roland TrueVIS VG2-540 - Step.5:.Removing.the.retainers; Step 5: Removing the Retainers

42
2.Installation
1. Assembly and Ink Filling
Step 5: Removing the Retainers
IMPORTANT
• Make sure to remove all the retainers. Any that remain may cause faulty operaon or breakdown
when the power is switched on.
• Store the retainers because they are needed again when transporng the machine.
Procedure
A
Remove all the retainers indicated by A, B, C, D and E.
There is no need to store the retainers indicated by E.
A B
C
D
E
A B/C/D
E E
B
Install the retainer indicated by B at the posion indicated in the gure for storage.
Bolt removed in step B