Roland TrueVIS VG2-540 - Page 52

50
2.Installation
1. Assembly and Ink Filling
E
Close the ink slot cover.
F
When the screen shown below appears, remove the drain bole and discard the dis-
charged uid.
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bole, a few drops of discharged uid may come out of the drain fun-
nel. Exercise cauon to prevent this uid from soiling your hands or the oor.
CAUTION
Before you detach the drain bole, be sure to wait for the screen to display
"EMPTY DRAIN BOTTLE." Aer discarding the discharged uid, promptly
aach the drain bole to the machine.
Failing to follow this procedure may cause discharged uid to ow out of the
tube and spill, soiling your hands or the oor.
WARNING
Never place discharged uid or ink near an open ame.
Doing so may cause re.
CAUTION
To store discharged uid temporarily, place it in the included drain bole
or in a durable sealed container such as a metal can or polyethylene tank,
and cap the container ghtly.
Any spillage or vapor leakage may cause re, odor, or physical distress.
G
Quickly aach the emped drain bole to the machine once more.
H
Press [ENTER].
When the screen shown in the gure appears, lling with ink is nished.
SETUP SHEET