Romet 4E - Seat and Door Adjustments; Seat and Safety Belt Operation

ROMET 4E Electric Vehicle Instruction Manual
20
V. Seat and Door
1. Seat
Adjust the driver’s seat manually. Try to move the seat with your own body to make sure that the seat is fixed in place.
The back seat adjusting handle is on one side of the
seat as shown in the picture.
Lift the back seat adjusting handle and adjust the
back seat to a satisfactory position through your own
back.
Lift the adjusting handle and press down on the back
seat, the back seat will kick back and can be adjusted
to a comfortable position.
The seat adjusting handle is in the front of the seat as
shown in the picture.
The seat is adjusted to the furthest position as shown
in the picture.
The seat is adjusted to the closest position as shown
in the picture.
If you adjust the driver’s seat manually during driving, the car may run out of control. You may be impelled to depress the accelerator pedal out of panic due to
Handle