The charging machine is under the tail lamp. Open the covering of the charging port. Open the cover of the charging machine.
1. When you need charging, insert the plug
into the plug base and then connect the power plug
to the 220V power.
2. Cut off the 220V AC and then detach the charging
plug after charging.
Don’t charge outside when it rains so as to
avoid accidents.
You must close the motor before charging.
High-voltage electrical equipment is forbidden. Read
the matched instructions carefully before charging
and check and clean the charging plug and plug base
to ensure that they function well.
Align the positioning convex points of the plug with
the concave points of the charging holder to insert
into the charging plug.
The charging wire power plug is connected to a 16A
220V plug base.
To Next Page
Loading...