EasyManua.ls Logo

Romet 4E - Before Start; Safety Check before Driving; Car Outside; Car Interior

Romet 4E
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ROMET 4E Electric Vehicle Instruction Manual
28
temperature will be too high which will influence the charging process. The air ventilation must be smooth. Don’t cover anything to avoid temperature rise and
damage of the internal components. Don’t charge the bad battery or non-chargeable battery.
Don’t wash the motor and controller directly with hydraulic monitor.
IX. Notes
For you safety
The car is for urban citizens. It is of wide internal space, comfortable driving and enjoys fast and sudden turns as ordinary cars. If you find it hard to start, shut off
regularly or there is abnormal knocking in the driving motor during acceleration, contact with the local dealer for repair and maintenance immediately.
Before start
1. Check whether the vehicle is in the charging position or not. If yes, cut off the power and detach the charging wire and put away.
2. Check the surrounding environment before entering into the car, such as snow, puddle, space and barriers.
3. Adjust the position and height of the seat and the height of headrest.
4. Adjust the rear mirror inside and outside the car.
5. Lock all the doors.
6. Wear the safety belt.
Safety check before driving
A safety check had better be performed before driving. The several-minute check will improve the driving safety and promote the fun of driving.
Please pay attention to the following items:
Car outside
Tire: check whether the tires function well. Carefully check whether there is cut, damage or abrasion.
Wheel nuts: ensure that no nut is loose or lost.
Leakage: check whether there is leakage of liquids like oil or anti-freezing fluid.
Lighting: ensure that headlamps, lamplets, cornering lamps and interior lamps function well.
Car interior
1. The battery surface shall be kept clean. You can use wet towel to clean up the surface dust.

Table of Contents