Safety
12 / 97
General safety instructions
4.5 General safety instructions
The following instructions give an overview of how the product is used safe-
ly. This general overview will be supplemented by the safety instructions in
the individual chapters.
Take note of general danger possibilities that could occur when handling
machines.
Use the prescribed personal protective equipment.
Make sure that the product corresponds to the respective valid safety reg-
ulations and the local fire departments guidelines and is always ready for
use.
On contact with dangerous chemicals (e.g. dry powder) make sure that the
manufacturer's safety datasheets and information is followed.
Dry powder and foam compound can endanger the environment.
► Do not dispose of dry powder and foam compound in bodies of water
or in the sewage system.
Foam compound and dry powder in particular are very corrosive.
► Carefully clean the product of extinguishing agent residue after every
operation.
When working inside the water or extinguishing agent tank, always ensure
good ventilation and ensure the safety of this work by having an additional
person outside the tank.
Should emergencies occur where people are injured, appropriate first aid
measures must be taken and, if necessary, emergency personnel are to be
called to provide professional treatment.
Observe the operation and maintenance manuals of additional products.
If you cannot rectify faults yourself or repairs cannot be performed by spe-
cially trained workshop personnel, Rosenbauer or the nearest Rosenbauer
service partner must be contacted immediately.
To Next Page
Loading...
Need help?
General
