Servicing and cleaning
86 / 97
Service procedures
8.6.2 Storage and transport
The portable fire pump and the corresponding installation material must be
stored and transported in its packaging. It must be handled carefully and
cautiously.
Preserving and storing
If the portable fire pump is not operated for a longer period of time (> 3
months) the following advice must be observed.
► If there is risk of frost the portable fire pump must be carefully drained
and then a dry suction process is to be carried out.
► Drain fuel injection system and fuel tank (deplete or pump away).
► Thoroughly clean the portable fire pump with moist cloths (use no run-
ning water or solvent).
► For storage without charge retention the battery is to be disconnected.
The leakage current on the electrical components of the portable fire
pump is approx. 0.5 mA.
To prevent the generation of sparks, the earthing cable of the bat-
tery must always be removed first and connected last.
To Next Page
Loading...
