Operation
54 / 97
Monitoring during operation
7.6 Monitoring during operation
The LCS (Logic Control System) monitors:
• engine starting/stopping, speed adjustment,
• fuel capacity, cooling water temperature, oil pressure, etc.
► The speed of the engine can be changed using the governor (S15a).
Optionally once this is reached, it is saved by pressing the governor
(S15a). The pump will then always regulate itself to this set pressure.
The operator must always be within reach of the pump control panel.
When a defect occurs, it is displayed on the screen.
► The operator must take appropriate measures to avoid damage.
► In case of abnormal noises reduce the engine speed, or shut down the
portable fire pump, if possible, to prevent damage.
To Next Page
Loading...
