Servicing and cleaning
78 / 97
Service procedures
8.6 Service procedures
Service work is work that may only be carried out by specially authorised
expert personnel.
This work is to be carried out or allowed to be carried out in accordance with
the manufacturer's regulations.
Maintain service intervals, as well as officially prescribed testing schedules
and create written records for them.
Observe the operating instructions of the individual pieces of equipment
and units!
NOTICE
Neglecting these recommendations will result in loss of warranty.
Change the priming pump oil
D81 Oil filler plug
D82 Oil drain plug
D84 Oil level sight glass
Drain the oil
► Make the pump compartment accessible.
► Place a suitable container underneath the oil drain plug of the priming
pump.
► Open oil drain plug and drain the oil.
► Collect the old oil and dispose of it properly.
► Close oil drain plug
Oil has been drained.
Observe the local regulations for oil disposal.
To Next Page
Loading...
Need help?
General
