Technical description
42 / 97
Optional equipment
RLS1000 LED lighting system
The RLS1000 light head can be attached by means of optional adapters on
the carrying frame. This requires at least two extensions.
To ensure operational safety, the RLS1000 can be turned on only when the
engine is running and the battery voltage is greater than 11.5 V (see symbol
- function indicators RLS illumination).
Scope of delivery:
• Adapter support
•Socket
Assembly:
► Fix the adapter support to both rear slots on the carrying frame by sus-
pending the straps.
► Insert the lighting head into the adapter support with extension and
connect cable to socket.
The extensions can be individually locked by twisting, to prevent
accidental loosening or falling out of the lighting head.
RLS1000 frame holder
Opening the covering hood is not possible when using the lighting system
with adapter support!
Read/observe the supplementary supplier documentation.
To Next Page
Loading...
Need help?
General
