Safety
14 / 89
Training and qualifications
4.4 Training and qualifications
Operator errors caused by inadequate qualifications can cause serious ac-
cidents or endanger the success of the operation. Safe operations can be
assured only when operation and consistent maintenance of the product is
performed exclusively by specially trained personnel.
Only qualified training by experienced firefighting experts and continuous
practice of operating procedures ensure safe operations.
One-time instruction is not sufficient!
The product may only be operated by persons who have successfully com-
pleted appropriate firefighting training.
The operator is responsible for defining responsibilities and supervision of
personnel as well as for adequate instruction and training according to ap-
plicable regulations.
Even during operation, make sure that persons without technical knowl-
edge never operate the product.
Personnel must exhibit physical and mental aptitude. Minors and persons
without firefighting training may not operate the product.
Modifications and conversions to the product may be performed only with
written authorization from Rosenbauer and must be performed by a manu-
facturer-authorised person.
To Next Page
Loading...
Need help?
General