Technical description
41 / 89
Optional equipment
For further information, please refer to the manufacturer's operation manu-
al.
6.3.10 Socket distributor
Mobile plastic distributor 2 x 400 V,IP 44. With 3 metre cable HO7RN-F 5G
1.5 mm². Input socket 16 A, 5 p, 400 V. 2 CEE 16 A, 400 V sockets.
400 V socket distributor
6.3.11 Tool kit
The tool kit is equipped with the most important tools for the power gener-
ator.
Scope of delivery:
• Tool bag
• 2 pcs. spark plugs
• Red test rod
• Red measuring strip
• Spark plug wrench
• TORX TX30 angle screwdriver
• SW10 open-end wrench
6.3.12 RLS1000 LED lighting system
The RLS1000 light head can be attached to the power generator by means
of optional adapters, this requires at least two extensions.
To ensure operational safety, the RLS1000 can be turned on only when the
engine is running and the battery voltage > 11.5 V.
Scope of delivery:
• 1 pc. tripod adapter
• 1 pc. retaining plate
• 1 pc plain bearing
• 5 pcs. oval head screws with Torx (M6 x 16)
• 6 pcs. earthing disks (M6)
Assembly:
To Next Page
Loading...
Need help?
General