Technical description
35 / 89
LCS operation panel
Pilot lamps
Symbol Name Functional description
ECO mode
(optional)
The control shows the condition of the
speed reduction.
The pilot lamp has three switching condi-
tions:
• Grey: preselected
• Green: active, speed lowered
• Black: deactivated
Active output con-
trol - APC
The control indicates a possible over-
heating of the power generator.
The output power is automatically re-
duced to prevent overheating.
The pilot lamp has two switching posi-
tions:
• Green: APC active, output power re-
duced
• Grey: APC deactivated, normal op-
eration
External refuelling
The control shows the condition of the ex-
ternal refuelling.
The pilot lamp has three switching condi-
tions:
• Green: active, fuel tank is being filled
• Grey: preselected, level in fuel tank
above the switch-on threshold
• Black: deactivated
• Red: error
Voltage monitoring
of the phases
The control shows the state of the voltage
at the corresponding phase.
The pilot lamp has three switching condi-
tions:
• Green: normal operation
• Black: phase deactivated / generator
off
• Red: voltage too high/too low
To Next Page
Loading...