L600N - Dual Band Wireless Router
26
CONFIGURATION GUIDE
Network Setup – WAN Interface Setup
2. WAN Interface Settings: The router supports 5 modes of WAN
connection, including Dynamic IP (DHCP), Static IP (Fixed), PPPoE, PPTP,
and L2TP. You may need to confirm with your ISP before selecting your
connecting modes.
• Dynamic IP (DHCP): L600N automatically obtains IP address, subnet
mask, and IP address of the gateway from the ISP.
• Static IP (Fixed): Select this If the ISP provides the IP address, subnet
mask, and information about the gateway and DNS server. You may
need to obtain the information from your ISP.
• PPPoE: Select this If your ISP provides dialup for user name and
password. DSL connection usually falls under here.
• PPTP: This is a method for implementing virtual private networks. You
will also need User Name and Password for this mode. Most VPN
connection falls here.
• L2TP: This is a method for implementing virtual private networks. You
will also need User Name and Password for this mode. Most VPN
connection falls here.
To Next Page
Loading...