L600N - Dual Band Wireless Router
54
CONFIGURATION GUIDE
Multicast Control
Multicast Control: Multicast control are support for layer 2 or
higher Ethernet switch.
• Enable IGMP Snooping : IGMP Snooping is used to
multicast management and control. When the Ethernet
switch of the second layer receives the IGMP packets
transmitted between the host and AP, IGMP Snooping
will analyze the packets to establish and maintain the
address table of the MAC multicast, and then the
routing multicast packets will be transmitted according
to the address table of the MAC multicast.
• Enable IGMP Proxying: allows an LAN PC to receive
desired multicast traffic from the Internet. You can
disable the function if you do not need it.
To Next Page
Loading...
Need help?
General
