Menu System
The menu system is accessed either by pressing MENU
and the Menu Selection button for the menu you want
to access, or through an auto-follow for selected
functions.
Menu Navigation
The menu system allows you to access all of the setup
and conguration information for the switcher. In some
cases, a menu can be accessed either by pressing the
MENU button and navigating to the menu, or by
double-pressing a button on the control panel.
1.
Press MENU.
2.
Press the button for the menu you want to navigate
to. The rst page of the menu is shown on the
display.
3.
Press NEXT to navigate to the next page of the
current menu. If the NEXT button is not lit, there
are no other pages to the current menu.
Tip: If you want to return to the first page of a menu, press and
hold NEXT and press HOME. You can also navigate up one
level in a menu tree by pressing and holding NEXT and pressing
UP.
Auto-Follow Menus
The switcher navigates to auto-follow menus
automatically when you select certain functions on the
switcher. For example, when you select a key the key
adjustment menu is shown on the display.
Auto-Follow functionality also applies to video source
buttons that have external devices assigned to them. If
you select a source button that an external device is
assigned to, the peripheral control menu for that specic
device is shown.
12 • Menu System — Graphite Operation Manual (v1.1)
To Next Page
Loading...