Ross Graphite - To Copy an ME Using the Control Panel; To Copy an ME Using Dashboard

To Copy an ME Using the Control Panel
Note: You must have at least a 2 ME control panel to perform
an ME copy from the control panel. If you only have a 1 ME
control panel, you must perform the copy from DashBoard.
This procedure copies the contents of ME 1 to ME 3 as
an example. Use the same procedure for any ME
combination.
1.
Press and hold the BKGD button on the transition
area of the ME that you want to copy to.
This is the destination ME that you want to copy to.
2.
Press the BKGD button on the transition area of the
ME you want to copy.
This is the source ME that you want to copy from.
To Copy an ME Using DashBoard
1.
Click Navigation Menu > Live Assist > ME
Copy.
2.
Click a Source button to select the source you want
to copy.
3.
Click a Destination button to select the destination
that you want to copy to.
4.
Click Copy.
16 • Switcher Basics — Graphite Operation Manual (v1.1)