Ross Graphite - Deleting Custom Controls; To Delete a Custom Control; Copying and Pasting Custom Controls; To Copy and Paste a Custom Control

•
Medium — 4 characters displayed on the top
line, and 4 on the bottom
•
Large — rst 2 characters are displayed
9.
Use the Color knob to select the background color
of the mnemonic.
10.
Use the Inv knob to swap the color of the text and
the background.
The Invert (Inv) selection is not applied when the
mnemonic is in split mode. In split mode, the top
half of the display is inverted, and the bottom is not.
Deleting Custom Controls
Any custom control on the switcher can be deleted to
remove unused customs to free up space for new custom
controls.
To Delete a Custom Control
There is no undo for this delete function.
1.
Press MENU > BANK 1 > DELETE
2.
Use the Bank knob to select the bank that the
custom control you want to delete is stored on, or
select the bank button directly.
3.
Use the CC knob to select the custom control that
you want to delete, or select the custom control on
the bus directly.
4.
Press the Func knob.
5.
Press the Confrm knob to delete the custom control.
Copying and Pasting Custom
Controls
The contents, or events, of a custom control can be copied
from one custom control and pasted to another. Along
with the events, the name and mnemonic settings are also
copied.
To Copy and Paste a Custom Control
1.
Press MENU > BANK 1 > Edit.
2.
Use the Bank knob to select the bank that the
custom control you want to copy is on, or select the
bank button directly.
3.
Use the CC knob to select the custom control that
you want to copy, or select the custom control on
the bus directly. If the custom control has a macro
recorded, an * is shown next to the number.
4.
Press Copy.
5.
Select the custom control that you want to paste into.
6.
Press Paste.
Graphite Operation Manual (v1.1) — Custom Controls • 55