Ross Graphite - Page 28

When a matte generator is assigned to a key border or
wipe border, the matte settings is part of the setup menu,
and become active when Border is set to greater than
0.
1.
Press NEXT.
2.
Use the Load knob to select the preset color you
want to use.
3.
Press the Load knob to load the selected color.
If you want to use the preset color, ignore the rest
of this procedure.
4.
Press NEXT.
5.
Use the Hue knob to adjust the hue of your custom
color.
6.
Use the Sat knob to adjust the saturation of your
custom color.
7.
Use the Lum knob to adjust the luminance of your
custom color.
28 • Patterns, Washes, and Mattes — Graphite Operation Manual (v1.1)