2 CHAPTER 2 – PRODUCT IDENTIFICATION
The identification data of the machine are shown in the label placed on the frame and indicated in
the declaration of conformity.
Use the above data both to order spare parts and in case of enquires with the
manufacturer (inquiry). The removal of this label is strictly forbidden.
Machines may be updated or slightly modified from an aesthetic point of view and, as a
consequence, may present features different from these shown, this without prejudicing what has
been described herein.
The warranty is valid for a period of 12 months starting from the date of the purchase invoice.
The warranty will end immediately when unauthorized modifications to the machine or parts of it
are carried out.
The presence of defects in workmanship must be verified by the Manufacturer’s personnel in
charge.
For all servicing and maintenance operations not specified or shown in these instructions, contact
your Dealer where the machine was bought or the Manufacturer’s Commercial Department.
Type: ……….
Model: ……….
Serial Number: ……….
Year of manufacturing: ……….
Capacity: ……….
Voltage: ……….
Power: ……….
Max. pressure: ……….
To Next Page
Loading...
