Rotary M50 User Manual

5.5 OIL
Use wear proof oil for hydraulic drive, in conformity with ISO 6743/4 rules (HM class). Fina
HYDRAN TS 32 or equivalent oil with features similar to those shown in the table is recommended:
TEST STANDARDS
FEATURES
VALUE
ASTM D 1298
Density 20°C
0.8 kg/l
ASTM D 445
Viscosity 40°C
32 cSt
ASTM D 445
Viscosity 100°C
5.43 cSt
ASTM D 2270
Viscosity index
104 N°
ASTM D 97
Pour point
 30 °C
ASTM D 92
Flash point
215 °C
ASTM D 644
Neutralization number
0.5 mg KOH/g
In case where the average ambient temperature differs from 25° C contact your local specialist oil
supplier to find a suitable substitute.
5.6 RECOMMENDED HYDRAULIC OIL
Recommended hydraulic oil for the lift to be used at standard temperatures (25°C - 30°C) is
described below.
For temperatures different from those standard, contact your dealer for suitable oil.
BRAND TYPE
AGIP OSO 32
API CIS 32
BP HLP 32
CASTROL HYSPIN HWS 32
ELF ELFONA DS 32
ESSO NUTO H 32
FIAT HTF 32
FINA HYDRAN TS 32
IP HYDRUS 32
Q8 HAYDYN 32
MOBIL DTE 24
ROL OIL LI 32
SHELL TELLUS OIL 32
TOTAL AZOLLA ZS 32
CHANGE HYDRAULIC OIL EVERY 5 YEARS

Rotary M50 Specifications

General

Brand	Rotary
Model	M50
Category	Scissor Lifts
Language	English