Rotax 912 i series Operator's Manual

Before starting the engine, read the Operators Manual, as it contains
important safety relevant information. Failure to do so may result in per-
sonal injuries including death. Consult the original equipment manufactur-
ers handbook for additional instructions!
WARNING
These technical data and the information embodied therein are the property of BRP-Powertrain
GmbH&Co KG, Austria, acc, BGBI 1984 no. 448, and shall not, without prior
written permission of BRP-Powertrain GmbH&Co KG, be disclosed in whole or in part to
third parties. This legend shall be included on any reproduction of these data, in whole
or in part. The Manual must remain with the engine/aircraft in case of sale.
Copyright 2014 © - all rights reserved.
ROTAX
®
is a trade mark of BRP-Powertrain GmbH&Co KG. In the following document the
short form of BRP-Powertrain GmbH&Co KG = BRP-Powertrain is used.
Other product names in this documentation are used purely for ease of identification
and may be trademarks of the respective company or owner.
Approval of translation has been done to best knowledge and judgement - in any case
the original text in german language is authoritative.

Rotax 912 i series Specifications

General

Number of Cylinders	4
Max Power	100 hp (73.5 kW)
Max Power Output RPM	5800 rpm
Ignition System	Dual electronic ignition
Oil System	Dry sump, forced lubrication with separate oil tank
Reduction Gear Ratio	2.43:1
TBO	2000 hours
Engine Type	4-stroke, horizontally opposed
Displacement	1352 cm³
Bore x Stroke	84 mm x 61 mm
Max Torque	128 Nm
Fuel Type	Avgas 100LL or unleaded automotive gasoline
Fuel System	Electronic fuel injection
Cooling System	Liquid/air-cooled