Rotax 912 i series - Scheduled maintenance checks

Effectivity: 912 i Series BRP-Powertrain page 4-4
OM Edition 1/Rev. 0 January 01/2012
d05873.fm
4.7) Exceeding of max. coolant temperature
Exceeding coolant
temperature
- Any exceeding of the max. admissible coolant temperature
has to be entered by the pilot into logbook, stating duration
and extent of over-temperature condition.
- A maintenance inspection should be carried out.
- Check the ECU error log file.
4.8) Exceeding of max. admissible oil temperature
Exceeding oil tem-
perature
- Any exceeding of the max. admissible cylinder head tempera-
ture has to be entered by the pilot into logbook, stating dura-
tion and extent of over-temperature condition.
- A maintenance inspection should be carried out.
- Check the ECU error log file.
4.9) Oil pressure below minimum - during flight
Oil pressure too
low
- Check oil system.
- A maintenance inspection should be carried out.
- Check the ECU error log file.
4.10) Oil pressure below minimum - on ground
Oil pressure too
low
Immediately stop the engine and check for reason. Check oil sys-
tem.
- Check oil quantity in oil tank.
- Check oil quality. See also Chapter 2.4).
- A maintenance inspection should be carried out.

WARNUNG
NOTICE
Reduce engine power setting to the minimum
necessary and carry out precautionary land-
ing.

WARNUNG
NOTICE
Reduce engine power setting to the minimum
necessary and carry out precautionary land-
ing.

WARNUNG
NOTICE
Reduce engine power setting to the minimum
necessary and carry out precautionary land-
ing.