d04920.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2/Rev. 0
24-00-00
page 3
August 01/2012
1) Requirements for the circuit wiring
General note
The connections have to be made by the aircraft man-
ufacturer in accordance with applicable regulations
and the enclosed wiring diagram.
See chap. 24-00-00 section: Switch requirements.
The power supply to the various consumers (e.g. bat-
tery) must be adequately protected by fuses. Using in-
correctly rated fuses may result in destruction of the
equipment.
Under no circumstances must consumer cables (e.g.
battery) be routed alongside the ignition cable. There
is a risk of electromagnetic interference or damage.
Do not bend, kink, pinch or otherwise improperly stress
the wiring harness. Use proper routing, clamping and
strain relief on wiring harnesses.
To Next Page
Loading...
Need help?
General
