Operator`s Manual RM1
Seite/page 79/132 ROTAX KART RM1 Ausgabe/Edition 01/2006
2.3. Battery charging plug
Using the battery charging plug (pos.3) the battery can be re-charged while installed in the vehicle.
2.4. Push-button for activation of engine reverse mode
The push-button (pos. 2) for activation of engine reverse activates the electronic reverse mode and
can be used when
• the vehicle is at standstill
• the engine is idling
By actuating the push-button the engine changes its
rotation sense by a special control of the ignition.
The reverse gear can be activated at 1
st
, 2
nd
gear
or neutral.
To drive backwards however the 1
st
gear must be
engaged.
When the reverse gear is activated, a signal LED
(pos. 1) flashes on the multi-functional display
and a warning tone sounds.
Attention: Please, read the warning hints
regarding reverse gear on the
battery cover.
To change to forward drive, activate the push-button for
reverse gear again under the same conditions, and the
engine changes to forward drive, the warning tone stops.
This technology was developed by ROTAX for the Kart and applied for patent.
To Next Page
Loading...