15 Communicator | 3.05
testing).
• MOBILE NUMBER: Enter the mobile number for the text message service.
• PAGER: Enter the pager phone number. Refer to Pager Setup, page 20 for options and
testing. In addition, refer to Configuring the Dial Delay, page 21.
NOTE: When entering the above numbers, refer to Phone Number Structure, page 15.
• MSG BY: Define which services the contact receives (Idle, Voice, Text, Voice+Text, Pager).
• FROM/TO: Time frame for receiving messages/calls (Default – FROM: 0:00; TO: 00:00 –
time frame is 24 hours, meaning always receiving messages).
• LANGUAGE: Select the language in which SMS messages are written: English, Turkish,
Russian, Spanish, Portuguese, Thai or Hebrew.
NOTE: Distribution of the alarm messages is according to the address book list, contact by contact.
Each user receives all forms of communication that are selected (Msg. By option) before
continuing to the next user.
The first user does NOT have a "FROM" or "TO" field to ensure there is always someone that
receives the notification from Communicator.
4.7.1 Phone Number Structure
When entering the voice, mobile and pager numbers the phone number structure is:
• 9 (outside line, if needed), # # # # # # #,,
The commas are the dial delay. Refer to Configuring the Dial Delay, page 21.
NOTE: To enter a comma, press and hold the “1” button.
4.8 Setting the Password
1. Go to MY FARM > Password.
2. Define a password and confirm it (to disable, type “0”).
If selected, a password is required for:
• Locally: Using the menu items
• Remotely: Acknowledge/disabling of alarms via phone
NOTE: If a password is defined, the Communicator locks the system when idle for five minutes or if
you press “9” from the main menu.
TYPE NEW PASSWORD:
To Next Page
Loading...
