Rotem P-COMM-V1 - Additional Details; USB Driver Installation

49 Communicator | 3.05
11.1.3 Additional Details
• Table 2 details the communication card types.
Table 4: Communication Card Types
RS-232 Card
RS-485 Card
RF Card
• Figure 13 illustrates how to wire the External Communication Box to a controller and an ELS
system.
Figure 13: External Communication Box Wiring Diagram with ELS
11.1.4 USB Driver Installation
The following procedure details how to install R-USB Driver version 5.00. This driver must be installed
before plugging in the USB cable between the host computer and the R-USB plug.
1. Ensure that the USB cable is disconnected from Communicator before installing the driver.
2. On the CD, click .