Communicator | 3.05 22
5.3.1.3 Status Report
Upon a user request, Communicator sends a status report on basic house functions and animal
statistics. The report includes the following specifications:
• Target Temp
• Average Temp
• Vent Level
• Vent Mode (minimum ventilation, natural, tunnel)
• Humidity
• Weight (current average animal weight)
• Pressure (static pressure)
• Water Control (daily water consumption)
• Feed Count (daily feed consumption)
• Mortality
By default, the report only includes Target Temp, Average Temp, Vent Level and Humidity.
NOTE: Platinum Controllers, Version 3.0 and higher, support this function.
To select the parameters:
1. Go to SYSTEM > Advanced Setup > GSM.
2. Use the +/- key to select the required parameter.
3. Press Enter to select/deselect the parameter.
4. Press Save.
The parameters are configured.
To receive a status report:
• Receiving the Report for One House
?SX > 'Send SMS' to the Communicator cell phone number.
? = Start of message
S = Status report
X = Represents house number (can be any positive number from 1 - 64)
• Receiving the Report for Several Houses
?SX#X#X > 'Send SMS' to the Communicator cell phone number
? = Start of message
S = Status report
X = Represents house number (can be any positive number from 1-64)
# = Sign separates between every house number
To Next Page
Loading...
